Door Handle Replacement
Door handles seem like an insignificant thing but if you aren't happy with the style or design of them, or find them difficult to use and use, you should consider replacing them. With a little patience, you can install the new handle in no time.
Most modern door handles have cover plates that conceal the screws to create a stylish appearance. If your new handle doesn't already have them connected, you'll need to attach them separately.
Remove the old handle
Door handles are not only essential for aesthetics of your home, but they're vital for safety since they allow you to lock and unlock your door. However, over time your door handle can lose its grip, feel loose, or look old and worn. This is a sign that it's probably the time to replace your door handle.
If your door handle is becoming difficult to use, it may be time to replace it. This is a serious problem as you will no longer be capable of locking or unlocking the door, which could put your family and yourself at risk.
Another reason to replace the door handle is if it's damaged or broken. A broken door handle can be extremely dangerous, particularly if your children or elderly family members struggle to open it and could get trapped in the. It's simple to fix a damaged handle on a door.
Modern door handles are usually standard sizes and should be able to fit any door. If you're not sure if the new door handle you're buying will work, try removing the old one and measuring its housing holes. This will enable you to buy the right size door handle.
It is easiest to take off the old door handle by taking it off from the door. Usually, a screwdriver is used. However some door handles have a cover plate that conceals the screws that mount them, so you'll need to remove this to reach the screws beneath. After you have removed the handle that was previously used, take note of how the spindle is connected. This will assist you in aligning the new handle.
You can also remove the door handle by removing the latch mechanism. You can use a screwdriver to remove the door handle. However, you will need to locate the small latch which is located on the edge trim piece. After you have removed the latch, unscrew the handle from the strike plate and then the latch off the door's edge.
Remove the Strike Plate
When replacing the handle, you'll be required to replace the latch plate that holds the hole which the door's latch hooks into when it closes. The package the new handles are packaged in will include two latch plates - either a rectangular or a circular one (see the diagram above detailing the components of a door handle). If you have an old rectangular latch plate, swap it with an oval one. window handles will let the latch hook onto the strike plate, making the handle more convenient.
The first step is to remove the screw that is holding the latch plate in place. These screws are often tight, and will require some force to loosen. It might be beneficial to get a second person to assist in this area if it is possible.
The latch plate should be removed from the door once the screws have been removed. If the latch plate is stuck or doesn't move use a small file to scrape the edges. This can help loosen the plate.
Now you can move on to creating the new door strike plate to be installed. Using the screws made of wood that were included with your new handles, screw the latch plate onto the inside of the doorjamb. Do not tighten the screws too much because this could damage the strike plate.
If you are not sure whether the latch plate is in the proper position, close and open the door to see if it latches and closes properly. If not then you'll need to adjust the strikeplate upwards or down or forward or back until the door closes properly.
If the door is jiggling or moving, it may be necessary to expand the hole for latching in the strike plate. This is more prevalent on older doors. It can be caused by wear and tear hinges that aren't shallow, the wrong size latch, or a damaged strike plate. If this is the situation you can use a metal file instead of a chisel or hammer to adjust the strike plate.
Removing the Latch
The latch is the metal piece that is angled that slides in and out of the hole that runs along the inside edge of your door. The latch is moved forward when you turn the handle. It also hooks into a hole in the frame of the door to keep your door closed. If your door wiggles when you close it, replacing the latch might be all that's needed to fix it.
The screws that hold the door latch are difficult to locate however, you can put a screwdriver in an insignificant hole on the trim plate and then pry the latch off. After you've removed the trim plate, it should be easy to remove the latch and the bolts that keep the spindle and latch in place.
If the latch is not easily removed, use a paperclip or tool to remove it from the handle mechanism. Place the item into the recessed slot of the latch and then gently twist or jiggle until you feel handle and latch begin to split. You may have to repeat this procedure several times before you can remove the latch.
You should be able to slide the new latch into its slot with no issues once you have removed the old one. Make sure the latch is positioned correctly in the slot and aligned with the screw chambers, and then use your new screws to attach it to the strike plate and door frame.
Take note of the backset (the distance between the centre of the large hole in the door's front and the edge) before installing the new handle. Verify that the size of the latch of the new handle is equal to the measurement.
If you are replacing the latch or handle or handle, or if the old lock cylinder is damaged, then you'll need a new one. If you're not changing locks, the new latch will fit in your existing recess, and work with your current keys. Pick a latch that has rectangular cover plates to match your old handles.
Remove the cover plate
You can replace your old door handles with a contemporary rose and lever designs to improve the look of your home. You can purchase complete sets of door handles that come with matching escutcheons as well as privacy adaptor kits.
The first step in replacing an internal door handle is to remove the cover plate or rose, which conceals the screws and mechanism inside. Find a release tab on the plate, and use a flathead screwdriver to remove it from the knob. It may have an opening on one edge or be secured by pins.
Remove the screw that holds the interior handle and put it aside after the cover plate is removed. Remove the screws that secure both the outer and inner plates. You can loosen them using a Philips Screwdriver. Remove the plates that hold the inner plate and latch from the door. Place them aside.
Not all doors have this gap. If it doesn't have a handle, you'll need to drill a hole into the door for the new handle. This is the same process for opening a locked door, but you will have to be extra cautious not to harm the frame or door.
After the holes are drilled after which you'll have to put in new door knob screws. Make sure you purchase the same size as the previous ones, so you do not end up with the handle that is too tight or too loose. You'll also have to install a new strike rod and latch plate that aren't part of the majority of door handle sets.
If you're in search of a reliable replacement for your interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's factory-fitted and has been praised with hundreds of five-star reviews. It's a great choice to replace damaged or worn door handle hardware inside your Chevy HHR.